Olympus FE 115 - Direct Printing (Pictbridge)

20
En
Using the provided USB cable, you may connect your camera directly to a PictBridge
compatible printer such as the Olympus P-11 to make prints.
1 Connect one end of the provided USB cable into the camera’s USB connector and
the other end into the printer’s USB connector.
2 Press [\ to select [PRINT], and press i.
While the camera is connected to a printer, the green lamp
on the camera remains on.
ONE MOMENT is displayed and the camera and printer are
connected. The PRINT MODE SELECT screen is displayed on
the monitor.
3 Use the arrow pad to select pictures and make prints.
Direct Printing (PictBridge)
USB cable
USB connector
Follow the operation guide displayed
here.
d4317_oima_e_basic_00_bookfile_7.book Page 20 Friday, December 9, 2005 6:35 PM