57
Getting to know your camera better
5
When you get an error message on the camera...
Monitor indication Possible cause Corrective action
q
CARD ERROR
There is a problem with
the card.
This card cannot be used. Insert a
new card.
q
WRITE-
PROTECT
Writing to the card is
prohibited.
The recorded image has been
protected (read-only) on a computer.
Download the image to a computer
and cancel the read-only setting.
>
MEMORY FULL
The internal memory
has no available
memory and cannot
store any new data.
Erase unwanted data. Before
erasing, insert a card to back up all
data or download important pictures
to a computer.
q
CARD FULL
The card has no
available memory and
cannot store any new
data.
Replace the card or erase unwanted
data. Before erasing, download
important pictures to a computer.
L
NO PICTURE
There are no pictures in
the internal memory or
on the card.
The internal memory or the card
contains no pictures.
Record pictures.
r
PICTURE
ERROR
There is a problem with
the selected picture and
it cannot be played back
on this camera.
Use image processing software to
view the picture on a computer. If that
cannot be done, the image file is
damaged.
CARD-COVER
OPEN
The battery
compartment/card cover
is open.
Close the battery compartment/card
cover.
g
BATTERY
EMPTY
The battery is empty. Charge the battery.
Y/M/D
When the camera is
used for the first time or
the battery has been
removed for a long time,
the date and time are on
the factory default
setting.
Set the date and time.
To Next Page
Loading...
