32 EN
Printing pictures
5 Disconnect the USB cable from the
printer.
1 Display the screen indicated on the right
according to procedure 1 and 2 on P.30
to 31, and press i.
2 Select [CUSTOM PRINT], and press i.
3 Follow the operation guide to adjust print settings.
You can use [EASY PRINT] even when the camera is turned off or in shooting mode.
With the camera turned off or in shooting mode, connect the USB cable. The
selection screen for the USB connection is displayed. Select [EASY PRINT].
g “EASY PRINT.” step 3 (P.31), “Other print modes and print settings (CUSTOM
PRINT)” step 2. (P.32)
Other print modes and print settings (CUSTOM PRINT)
OK
<
EASY PRINT START
PC
/
CUSTOM PRINT
USB
PC
OK
EASY PRINT
CUSTOM PRINT
EXIT
SET
USB screen
Operation guide
To Next Page
Loading...
