Olympus FE-47 - System Requirements

11 EN
Installing the supplied
computer software (ib)
After checking the system requirements, follow
the instructions below to connect the camera to
a computer and install the supplied computer
software (ib).
System requirements
Windows XP (Service Pack 2 or later)/
Windows Vista/Windows 7
Connecting the camera
Computer (on and running)
Multi-connector
USB cable (supplied)
For information on using the computer
software (ib), see the software’s online help.
4
1
2
This camera allows the user to take pictures
using the internal memory even when no
SD/SDHC memory card (sold separately) is
inserted. “Using an SD/SDHC memory card”
(p. 47)
“Number of storable pictures (still images)/
Continuous recording length (movies) in the
internal memory and SD/SDHC memory
cards” (p. 48)
To remove the SD/SDHC memory card
12
Press the card in until it clicks and comes
out slightly, then grab the card and pull it
out.