Olympus FE-47 - Operation guide; Setting the date, time and time zone

12 EN
1
Insert the supplied CD in a CD-ROM
drive.
A setup screen will appear on the computer
monitor.
If the setup window is not displayed,
select “My Computer” (Windows XP) or
“Computer” (Windows Vista/Windows 7)
from the start menu. Double-click the
icon for the CD-ROM drive to open the
setup CD window and then double-click
“CameraInitialSetup.exe”.
2
Connect the camera to the
computer.
3
Follow the on-screen instructions
on your computer.
●
Operation guide
Operation guides displayed at the bottom of the
screen indicate that the m button, H button,
or zoom buttons should be used.
MENU OK
SEL. IMAGE
ERASE/CANCEL
Operation guide
OK
SET
1
2
3
FINE ZOOM OFF
R OFF
ICON GUIDE ON
AF MODE FACE/iESP
COMPRESSION NORMAL
MENU OK
SETEXIT
Setting the date, time and
time zone
The date and time set here are saved to image
fi le names, date prints, and other data.
1
Press the n button to turn on
the camera.
The date and time setting screen is displayed
when the date and time are not set.
X
-- -- -- --
:..
Y/M/D
MENU
Y M D TIME
CANCEL
--------
Date and time setting screen
2
Use FG to select the year for [Y].
X
:..
Y/M/D
MENU
Y M D TIME
CANCEL
20102010
-- -- -- --
●