5
Playback
100
Selecting functions from the playback menu
Point the camera microphone at the
target and start recording.
● To obtain the optimum sound, the microphone should be placed no farther than
1 m (3.3 ft.) away from the subject.
● If you re-record the sound, the original sound is erased.
● Sound may not be recorded if there is insufficient card memory available (the
CARD FULL message is displayed).
● Sound recording may pick up camera noises, such as button operation.
● Once sound has been added to an image, it is not possible to erase the sound
only. In this case, make a re-recording without sound.
Notes on adding sound
Displayed when recording is in
progress. When recording is
finished, this screen disappears.
To Next Page
Loading...
