Olympus Ferrari digital model 2004 - Specifications

201
12
Miscellaneous
Specifications
Camera
Product type : Digital camera (for shooting and displaying)
Recording system
Still picture : Digital recording, JPEG (in accordance with Design rule for Camera File
system (DCF))
Applicable :
Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching II, PictBridge
standards
Movie : QuickTime Motion JPEG support
Memory : xD-Picture Card, 16 MB to 512 MB
No. of storable : Still picture
pictures Approx. 20 frames (SUPER HIGH: 2048 x 1536 pixels)
(When using a Approx. 33 frames (HIGH: 1600 x 1200 pixels)
16 MB card) Approx. 58 frames (BASIC: 1024 x 768 pixels)
Approx. 99 frames (E-MAIL: 640 x 480 pixels)
Movie
Approx. 41 seconds (STANDARD: 320 x 240 (15 frames/sec))
Approx. 149 seconds (EXTENDED: 160 x 120 (15 frames/sec))
No. of effective : 3,200,000 pixels
pixels
Image pickup : 1/2.7" CCD solid-state image pickup 3,340,000 (gross)
device
Lens : Olympus lens 5.8 mm to 17.4 mm, f2.9 to f4.9,
(equivalent to 38 mm to 114 mm lens on 35 mm camera)
Photometric : Digital ESP metering by image pickup device, Spot metering system
system
Shutter speed :
1/2 to 1/725 seconds (the slowest shutter speed is 4 seconds in certain
situation-related shooting modes)
Shooting range : Normal: 50 cm (1.6 ft.) to
∞
, Macro mode: 30 cm (1.0 ft.) to
∞
Monitor : 2.5" TFT color LCD display, Approx. 215,000 pixels
Operating environment
Temperature
: 0 to 40°C (32 to 104°F) (operation)
–20 to 60°C (– 4 to 140°F) (storage)
Humidity : 30% to 90% (operation)
10% to 90% (storage)
Power supply : Only an Olympus LI-20B lithium-ion battery
AC adapter specified by Olympus
Dimensions : 94 mm x 67 mm x 22 mm (3.7" x 2.6" x 0.9") (excluding protrusions)
(W) X (H) X (D)
Weight : Approx. 160 g (0.4 lb) (without battery and card)
Cradle
Connector : DC-IN jack, USB connector (mini-B), A/V OUT jack
Operating
environment : 10 to 40°C (50 to 104°F)
Dimensions : 108 mm x 42 mm x 63 mm (4.3" x 1.7" x 2.5")
(W) X (H) X (D)
Weight : Approx. 90 g (0.2 lb)
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OR OBLIGATION ON THE PART OF
THE MANUFACTURER.