Olympus Ferrari digital model 2004 - RESET - Restoring the Factory Default Settings

71
Selecting functions from the shooting menu
4
Using the advanced shooting functions
Select RESET in the menu. ~ P. 5 5
Select YES.
Factory default settings are restored.
RESET — Restoring the factory default settings
Normally, current camera settings (including any changes you have made) are saved
when the power is turned off. If you prefer the original setting to be restored, you can
use this function to restore the factory default settings (~ P. 204) after the power is
turned off.
SCENE SELECT
FLASH MODE
OFFOFF
RESET
P
P
SH
3M
EXIT SELECT GO
BACK
OK
YES
NO
RESETRESET
RESET ALL MODERESET ALL MODE
P
CANCEL SELECT GO
BACK
OK
Control dial
BACK/NEXT
button
MENU/OK button
Example: FLASH MODE setting in the menu
P
SH
3 M
FLASH MODE is set to .
P
SH
3 M
FLASH MODE is returned to the
default setting AUTO (no indication).
If RESET is performed...
Rotate to
select
MENU/OK
Press to confirm
Rotate to
select
MENU/OK
Press to confirm
The settings you have made in the
SETUP menu (~ P. 114) are
retained.