The erase confirmation screen is
displayed.
NO: Cancels erasing.
Displayed when erasing is in
progress. When erasing is finished,
this screen disappears.
If no images are selected, the step
screen (
~ P. 94) is displayed
again.
It is not possible to erase images with the mark on multiple screens. Reset or
keep the selected images on the index screen before going to the next index
screen.
RESET : Resets the selected images. The next
screen is displayed. Do steps from
step (~ P. 94) of “Selecting
images to be erased”.
KEEP : Keeps the selected images. The
screen where you selected them is
displayed again. To erase the selected
images, press BACK/NEXT without
rotating the control dial, then go to
step .
If the SEL. IMAGE screen is displayed
To Next Page
Loading...
