LOADING THE CARTRIDGE
FILM
Use unexposed negative-color IX240
cartridge film (ISO 100~400).
1. Make sure that is displayed on the
camera's exposure counter. Turn the
cartridge cover release to open the
cartridge cover
2. Insert a cartridge with the
(unexposed) visual exposure indicator
and close the cartridge cover
, The
film will automatically advance to the
first frame and"I" will appear in the
exposure counter
• If starts blinking after the cartridge
has been loaded, reload the cartridge.
The battery must already be loaded
before you load a cartridge.
• If you remove the battery before the
roll of film has been fully exposed, the
exposure counter returns to . (You
will be able to continue shooting,
however.)
12
To Next Page
Loading...
