Direct buttons
14
1
Basic operation
Basic functions can be easily operated using direct buttons. Use the arrow pad and
i to adjust settings. Follow the on-screen display to select and adjust each setting.
How to set the flash mode using n is shown below.
1 Set the mode switch to K, and press n.
• The flash mode selection screen is displayed.
2 Press [\ to select the flash mode.
3 Press i.
• The setting is made, and the menu closes.
Using the direct buttons
FLASH MODE
AUTO
GO
SELECT
Current setting
Operation guide
SELECT→ Press [\ to select the
setting.
GO→ Press i to commit
your selection.
FLASH MODE
AUTO
GO
SELECT
Selected setting
This indicates more settings
below. Press \ to display the
next item.
To Next Page
Loading...
