Olympus LG-LSLED - Adjusting LG-DI;LG-DFI (Dual Light Guide;Dual Light Guide)

11
LG-LSLED
3
A
Insert the filter slider
A
into LG-LSLED completely to the end.
During operation, keep the filter slider inserted completely
or pulled out to the click position.
If you operate LG-LSLED with the filter slider placed at the
position other than two positions described above, the
cooling in LG-LSLED may be impacted adversely or the
filter slider may be damaged.
3
NOTE
3
Adjusting LG-DI/LG-DFI (Dual light guide/Dual light guide)
A
A
B
1
Illuminate the light to the sample from the position where the distal
ends
A
of the light guide do not interfere with operation.
For procedures to prevent the light guide from bending
spontaneously, see page 4.
1
TIP
Using HLL301 (Spot lens)
Loosen the clamping screw
A
of HLL301 (Spot lens), insert HLL301
into the distal end
B
of LG-DI or DFI, and tighten the clamping
screw
A
.
1