Olympus LS-11 User Manual

16
Getting Started
1
2 3 button
9 0 button
`/ OK button
LIST button
MENU button
[Time & Date] will appear
on the display
[Others] will appear on
the display
1
While the recorder is during stop
mode, press the MENU button.
• The menu will appear on the display (☞
P.41).
4
Press the 2 or 3 button to select [ Time
& Date ].
Changing the Time and Date
While the recorder is during stop mode, press and
hold the STOP 4 button to display the Time and
Date, Remaining Memory and File Format.
If the Time and Date is not correct, set it using the
procedure below.
Note
• If you press the `/OK button during the setup
operation, the recorder will save the items that
were set to that point.
2
Press the 2 or 3 button to select
[ Others ] tab.
• You can change the menu display by mov-
ing the settings tab cursor.
3
Press the `/ OK or 9 button to move
the cursor to the item to set.
5
Press the `/ OK or 9 button.
• The “hour” will flash on the display, indicat-
ing the start of the Time and Date setup
process.
The following steps are the same as Step 1
through Step 3 of “Setting Time and Date [Time
& Date]” (☞ P.15).
6
Press the MENU button to close the
menu screen.
Setting Time and Date [Time & Date]

Olympus LS-11 Specifications

General

Built-in microphone	Yes
Maximum recording time	69.35 h
File type	WAV / WMA / MP3, PCM
Battery type	AA
Dimensions (WxDxH)	48 x 22.4 x 131.5 mm
Internal memory	8192 MB
Display type	LCD
Display size (HxV)	30.1 x 35.4 mm
Interface	USB
Headphone out	2
Recording battery life	23 h

Weight and Dimensions

Weight	165 g