What to do if my Olympus Voice Recorder playback is inaudible?
If you can't hear the playback on your Olympus Voice Recorder, there are a few potential causes and solutions: * If earphones are connected, disconnect them to use the built-in speaker. * If [Off] is selected for [Speaker], then select [On] to use the built-in speaker. * If the volume is set to [00], adjust the volume to a higher level.
How to fix a blank display on my Olympus Voice Recorder?
If the display on your Olympus Voice Recorder is blank, it could be due to a few reasons. First, check that the battery is inserted properly, ensuring the positive and negative terminals are correctly placed. Second, the remaining battery power may be low, so replace or charge the battery. Finally, ensure that the power is turned on.
Why is my Olympus LS-P2 audio file sound distorted?
If the audio file sound from your Olympus Voice Recorder is distorted, it could be because the recording level hasn’t been adjusted; redo recording after adjusting the recording level. Alternatively, the voice recorder’s recording level, or the output level of the connected external device may be too high. If the problem continues after adjusting the voice recorder’s recording level, adjust the output level of the external device.
What to do if my Olympus LS-P2 is unable to operate?
If your Olympus Voice Recorder is not operating, there are a few potential reasons. The remaining battery power may be low, so replace or charge the battery. Also, make sure the power is turned on. Finally, check if the voice recorder is in HOLD mode and, if so, release HOLD mode.
Why is my Olympus LS-P2 unable to record?
If your Olympus Voice Recorder is unable to record, it could be due to the following reasons: 1. There is no remaining memory, so erase unneeded files. 2. The maximum number of recordable files has been reached, so select another folder.
Initial steps for battery insertion, power on, and basic settings.
Procedures for recharging the battery via USB or AC adapter.
Step-by-step guide for managing microSD card storage.
Step-by-step instructions for starting and stopping audio recordings.
Choosing preset recording settings optimized for different environments.
Connecting and using external microphones for enhanced audio capture.
Steps for selecting and playing audio files, adjusting volume.
Adjusting playback speed for learning or faster review.
Procedures for deleting individual files or entire folders from storage.
Step-by-step guide for pairing and managing Bluetooth connections.
Procedures for connecting and safely disconnecting the recorder from a PC.
Guide on copying audio files between the recorder and a computer.
Comprehensive guide to diagnosing and resolving common device problems.
Overview of safety symbols and general precautions for safe operation.
Specific warnings related to the use of the voice recorder itself.
Critical safety guidelines for handling, charging, and disposing of batteries.
General| Frequency Response | 20 Hz - 20 kHz |
|---|---|
| Audio Format | WAV, MP3 |
| Sampling Frequency | 44.1 kHz, 48 kHz |
| Bit Depth | 16-bit |
| Microphone | Built-in stereo microphone |
| Storage | microSD card slot |
| USB | Micro USB (USB 2.0) |
| Power Source | Rechargeable lithium-ion battery |
| Input/Output | 3.5mm headphone jack |
To Next Page
