2
Recording
29
EN
Recording
Pausing/resuming recording
1
Press the
REC
( s) button during
recording.
• Recording pauses, and the blinking
message [75 PAUSE] appears in the
display.
• Recording is stopped automatically
after being paused for at least 60
minutes.
2
Press the
REC
( s) button again
while recording is paused.
• Recording resumes from the position it
was paused at.
Quickly checking a recording
1
Press the `
OK
button during
recording.
• Recording ends, and the file just
recorded is played.
Recording settings
Various recording settings are available,
letting you tailor recording to different
recording conditions.
[
Rec Level
]
(☞P. 55)
Sets the recording level.
[
Limiter
]
(☞ P. 56)
Sets the correction method
according to the sound input
during recording.
[
Rec Mode
]
(☞ P. 56)
Sets the recording sound quality.
[
Zoom Mic
]
(☞ P. 57)
Sets the built-in stereo
microphone’s directivity.
[
Low Cut Filter
]
(☞ P. 58)
Reduces humming sounds
from equipment such as
air-conditioners or projectors.
[
Mic Select
]*
(☞ P. 58)
Selects whether or not the built-
in center microphone is to be
turned on or off.
[
VCVA
]
(☞ P. 59)
Sets the trigger level for voice-
activated recording (VCVA).
[
V-Sync. Rec
]
(☞ P. 60)
Sets the trigger level for voice-
synchronized recording.
[
Rec Scene
]
(☞ P. 31)
Used to select one of multiple
preregistered templates of
recording settings. When
selected, each template enters
several settings tailored to a
particular recording location
or condition all in a single
operation.
* LS-P2 model only
To Next Page
Loading...
