2
Recording
28
EN
Recording
NOTE
• To prevent the beginning of the
recording being cut off, start recording
after the recording indicator light has
lit or mode indicator has appeared in
the display.
• When the remaining possible recording
time is 60 seconds, the LED indicator
light starts flashing. It flashes more
rapidly as the remaining time decreases
(at the 30- and 10-second points).
• When [Folder full] appears, no more
recording can be done. To record more,
you will need to select a different folder
or delete unneeded files (☞P.47).
• If [Memory full] appears, the voice
recorder has no more available
memory space. You will need to
delete unneeded files to record more
(☞P.47).
• When using a microSD card in the voice
recorder, be sure the desired recording
media setting ([Internal memory]
or [microSD card]) has been selected
(☞P. 68).
• Processing performance may
be reduced when data has been
repeatedly written to or deleted from
the recording media. Please initialize
the recording media in this case
(☞P. 87).
Recording linear PCM format files of over
2 GB
When recording a linear PCM format file,
recording will continue even after the file size
exceeds 2 GB.
• The data is divided and saved in separate
files of up to 2 GB. The files are processed
as multiple files during playback.
• After recording 200 files which exceed 2GB
recording stops.
To Next Page
Loading...
