48
Menu Setting
4
4 Others (Continued)
Fn Setting
When functions are registered in the Fn button, each time the Fn button is pressed, you
can set or change the menu of registered function.
Setting:
[Off]: No functions will be allocated to the button.
[Index] (☞ P.35) [Rec Mode] (☞ P.43)
[Rec Level]: (☞ P.43) [Zoom Mic] (☞ P.43)
[Play Mode] (☞ P.45) [Reverb] (☞ P.45)
[EUPHONY] (☞ P.45) [MemorySelect] (☞ P.46)
[Property] (☞ P.49) [Light] (☞ P.46)
To call up a registered function:
When the Fn button is pressed, menu setting display of registered function
will appear:
[Rec Mode]: [PCM] [MP3] [WMA]: The recording rate can be configured
for each file format.
[Rec Level]: [Manual] [Auto]: You can configure whether to adjust the
recording level automatically or to adjust it manually. When
the [Rec Level] is set to [Manual] you can configure the limiter
function.
[Zoom Mic]: [Off] [Wide] [Standard] [Narrow] [Zoom]
[Play Mode]: [File] [File Repeat] [Folder] [Folder Repeat] [All]
[All Repeat]
[Reverb]: [Normal] [Studio] [Club] [Hall] [Dome]
[EUPHONY]: [Normal] [Natural] [Wide] [Power]
[MemorySelect]: [Built-in Memory] [SD card]
[Property]: File and folder information can be confirmed from the menu
screen.
Each time the Fn button is pressed, the setting of registered function is changed:
[Light]: [On] [Off]: Select backlight on or off by pressing the Fn
button.
If the Fn button is pressed during recording or playback, the registered function
is performed:
[Index]: With each press of the Fn button, an index mark or temp
mark is added.
• When the registered function is [Rec Mode], [MemorySelect], or [Property], these
will not function if the Fn button is pressed during recording or playback. While the
recorder is during stop mode, press the Fn button.
Menu Setting Method
To Next Page
Loading...
