EN 47
Printing pictures
3
Press
h
/
<
.
•
Printing starts.
•
When printing is finished, the picture selection
screen is displayed. To print another picture, press
pq
to select a picture, and press
h
/
<
.
•
When you are finished, disconnect the USB cable
from the camera with the picture selection screen
displayed.
4
Remove the USB cable from the
camera.
5
Remove the USB cable from the printer.
1
Display the screen being indicated on the right according to the
procedure 1 and 2 in P. 46, and press
o
.
2
Select [CUSTOM PRINT], and press
o
.
You can use [EASY PRINT] even when the camera is turned off or in shooting mode. With the
camera turned off or in shooting mode, connect the USB cable. The selection screen for the
USB connection is displayed. Select [EASY PRINT].
g
“EASY PRINT” Step 3 (P. 47), “CUSTOM PRINT” Step 2 (P. 47)
Other print modes and print settings (CUSTOM PRINT)
PC / CUSTOM PRINT
EASY PRINT START
OK
PRINTEXIT
OK
SET
USB [IN]
PC
EASY PRINT
CUSTOM PRINT
EXIT
Operation guide
To Next Page
Loading...
