78 EN
Appendix
Using the internal memory or card
You can confirm on the monitor whether the internal memory or card is being used during shooting
and playback operations.
1 Turn off the camera.
2 Open the card cover.
Inserting the card
3 Orientate the card, and insert it into
the card slot as shown in the
illustration.
• Insert the card straight in.
• Insert the card until it clicks into place.
Inserting and removing the card
Shooting Mode Playback mode
Memory indicator
[IN] : When internal memory is used.
[xD] : When the card is used.
Card cover
Notch
Contact area
d4321_e_unifild_Print_00_bookfile.book Page 78 Tuesday, December 19, 2006 11:20 AM
To Next Page
Loading...
