Selecting
the
aperture
value
and
shutter
speed
for
shooting
pictures
(M
mode)
This mode enables the user to set the aperture
value and shutter speed manually.
1 Set the mode dial to
M.
M mode indicator
Difference between Shutter speed Aperture
the current and value
correct exposures
.2
After pressing 00, select the
aperture value
I shutter speed using
oo(]]~ill,
and press the @ button.
~~~
~~~
(@)
8 :Aperture value becomes larger.
o :Aperture value becomes smaller.
@] : Shutter speed becomes faster.
@] : Shutter speed becomes slower.
([)
When the difference between the current
and correct exposures exceeds EV±3.0, the
indicator appears red.
Long-exposure (bulb) shooting
Set the shutter speed to [BULB] by pressing
QD.
The shutter stays open while the shutter
button is pressed and held.
(l) The maximum time that the shutter can
remain open is 8 minutes. This is possible
only when [ISO] (p. 31) is set to [64].
Smoothing
out
skin
tone
and
texture
(BEAUTY
mode)
The camera finds a person's face and gives the
skin a smooth, translucent look for taking the
picture.
1 Set the mode dial to
BEAUTY.
BEAUTY
mode indicator
2 Point the camera toward the
subject. Check the frame appearing
around the face detected by the
camera, and then press the shutter
button to take the picture.
• The unedited image
and
edited image
are
both
saved.
• If the image cannot
be
retouched, only
the
unedited image
is
saved.
'1') The frame may not appear
or
may take
some time to appear for some subjects.
In
addition, this function
may
have no visible
effect on some subjects.
(J)
The [IMAGE SIZE]
of
the retouched image
is limited to
!11!]
or
lower.
EN
19
To Next Page
Loading...
