Creating panoramic images
[E?$
PANORAMA]
8:;J
PANORAMA
Taking pictures with
[COMBINE IN
CAMERA
1]
CD
Press
the
shutter
button
to
take
the
first
frame.
(2)
Move
the
camera
slightly
in
the
direction
of
the
second
frame.
'1
Not available when SCN mode
is
selected.
'2 The
[.
IMAGE QUALITY]
(p.
29) setting cannot
be
changed.
Submenu 2
COMBINE
IN
CAMERA
1.,.2
COMBINE
IN
CAMERA2'2
COMBINE
IN
PC
Application
Three frames are taken and
combined
by
the camera. The
user only composes the shots
so
that the target marks
and
pointers overlap, and the camera
automatically releases the shutter.
The shooting functions are already
preset
to
the optimum settings for
panoramic shooting.
Three frames are taken and
combined
by
the camera. The
user composes the shots using
the guide frame and manually
releases the shutter.
The frames that were taken are
combined into a panorama image
using the OLYMPUS Master 2
software from the provided
CD-ROM. Pictures are taken
in
the last [ISO] or
[~
SCN]
settings
(except for some scene modes).
Target mark
Pointer
Screen when combining
images from left
to
right
@
Move
the
camera
slowly
while
keeping
it
straight,
and
stop
the
camera
where
the
pointer
and
target
mark
overlap.
•
The
camera releases
the
shutter
automatically.
The focus, exposure
(p.
14), zoom position
(p.
21) and [WB] (p. 30) are locked at the
first frame.
I''!) The optical zoom is limited up to 10x.
(!)
The flash (p. 23)
is
locked to
@ (FLASH OFF) mode.
(l,;,
Panoramic images can be edited using
[SHADOW ADJ] (p. 44) only.
(I)
"Playing back panoramic images"
(p.
28)
42
EN
::/)
To
combine only two pictures, press the
@ button before taking the third frame.
(4)
Take
the
third
frame
in
the
same
way
as
step
@.
• After
the
third
frame
is
taken,
the
camera
automatically processes
the
frames
and
the
combined panoramic
image
is
displayed.
(!)
To
cancel a panoramic picture during
shooting, press the
MENU
button.
(lJ
When the shutter does not automatically
release, try [COMBINE
IN
CAMERA2] or
[COMBINE
IN
PC).
To Next Page
Loading...
