Locking
the
exposure
and/or
focus
position
for
shooting
(AE
LOCKIAF
LOCK)
Once the exposure and/or focus position are/is
set for a subject
in
shooting mode, you can
continue shooting at the same exposure, focus
positior or both (AE LOCK, AF LOCK or AF
LOCK
+ AE LOCK) even if the composition of
the shot is changed.
1 Assign either [AE LOCK], [AF
LOCK] or [AF LOCK
+ AE LOCK] to
the
~
button.
•
In
the default setting, [AE LOCK]
is
assigned to
this button.
[CUSTOM BUTTON] (p. 57)
2 Compose the shot and press the
~
button.
• The exposure/focus position setting assigned
in
step 1
is
locked.
IAELI
mark
AF target mark
IAFLJ
mark
-~~
When
setting
the
[AF LOCK + AE LOCK]
To
cancel the setting
Press the
~
button again so that the
IAELIMFLJ mark no longer appears.
3 After changing the composition
of
the shot, press the shutter button.
26
EN
Using
a
function
assigned
to
the
E1J
button
(Custom
button)
This allows you to register a frequently used
function (except
Bm!],
BEAUTY,
~).
Once
registered, you can set the settings directly with
the button instead
of
displaying the screen from
the menu.
[CUSTOM
BUTTON] (p. 57)
1 Press the
~
button.
2 Use
~0
to select the setting option,
and press the
@ button to set.
Using
the
FUNC
menu
The FUNC menu provides the following menu
functions that can be quickly called and set.
• [DRIVE) (p. 32)
• [WB] (p. 30)
• [METERING]
(p.
33)
•
[~~
IMAGE QUALITY) (p. 29)
• [MY MODE SETUP)
(p. 56)
• [ISO] (p. 31)
When
the
mode
dial is
set
to
the
IM:J',
1M:J'1
to
1M:J'4
are
selectable.
1 Press the @ button before
shooting.
2 Use
OOQD
to select the menu
function and
~0
to select the
setting option, and then press the
@ button to set.
To Next Page
Loading...
