Viewing the image immediately aftershooting
[REe
VIEW]
~
SETUP
~
REC VIEW
Submenu 2
SUbmenu 3
.......
Applicati<)f\
The image being recorded is not displayed. This allows the user to
OFF
-
prepare for the next shot while following the subject
in
the monitor or
viewfinder after shooting.
LCD ONLY The last image being recorded is always displayed on the monitor.
ON
The last image being recorded is displayed
on
the currently selected
CURRENT display device (monitor or viewfinder). "Switching between the monitor
and viewfinder" (p. 25)
(1) Even when set to [ON], you can resume shooting while the image is being displayed.
Selecting where the top menu is displayed [MENU DISPLAY]
~
SETUP
~
MENU DISPLAY
Submenu 2
LCD ONLY
CURRENT
Application
...
The top menu is always displayed
on
the monitor.
The top menu
is
displayed
on
the currently selected display device (monitor or viewfinder).
<l)
The submenu chosen in [MENU DISPLAY] will be displayed on the screen when the following
operations are done.
• Pressing the
MENU
button
--
• Pressing the
III
button
in
playback mode
Increasing the brightness
of
the monitor when taking pictures
[LIVE VIEW BOOST]
~
SETUP
~
LIVE VIEW
BOOST
Submenu
2
OFF
ON
52
EN
The subject will be displayed
on
the monitor at the brightness level according to the exposure
that was set. This allows you to preview the images to be captured on the monitor before
shooting.
The camera will automatically adjust the brightness level and display the subject on the
monitor for easier confirmation. The results of the exposure compensation adjustment will not
be
shown on the monitor.
To Next Page
Loading...
