Olympus SP-590UZ - Page 54

Adjusting the brightness of the monitor
[!9/J
~ SETUP ~ ~9J
CD Use OOQD to adjust the brightness while
viewing the screen, and then press the
@
button.
Setting the date and time in another
time zone [DUAL
TlMEJ
~ SETUP ~ DUALTIME
The date and time set in the [ON] setting are
reflected on the image file names and date
prints.
Submenu 2 Submenu 3 Application
OFF
ON
(Proceeds
to the
setting
screen"l)
Switches to the date and
time set
in
[<2) (Date/time)].
Switches to the date
and time that were set
in
[DUALTIME] when using
the camera
in another
time zone.
Setting the date and time [<2:)J
~ SETUP ~ <2)
"Setting the date and time" (p. 12)
"1 The setting procedure is identical to that in "Setting
the date and time"
(p. 12)
The date display order
is the same as that
set with
[<2)].
Automatically rotating images shot
with the camera in a vertical position
during playback[PIC ORIENTATIONJ
~ SETUP ~ PIC ORIENTATION
During shooting, the [0] (p. 48) setting on
the playback menu is set automatically.
This function may not work properly
if the
camera is facing upwards
or downwards
during shooting.
To select the date display order
CD Press 0 after setting Minute, and use
OOQD to select the date display order.
Y MD TIME
~
Date order-
CANCEL.~
54 EN
Submenu 2
OFF
ON
Application
Information about the vertical/horizontal
orientation
of the camera during
shooting
is not recorded with images.
Images shot with the camera
in a
vertical position are not rotated during
playback.
Information about the vertical/horizontal
orientation of the camera during
shooting is recorded with images.
Images are automatically rotated during
playback.