;1
,.
For details
on
changing the input source
of
the
TV,
refer to the TV's instruction manual.
\r
Set the mode dial to
[B
when connecting via
an
AV cable.
(]~~
Use
an
HDMI cable that matches the HDMI mini connector on the camera and the HDMI connector
on the
TV.
\l~
The movie playback screen cannot be displayed when connecting via
an
HDMI cable. In addition, the
sound will not be played.
(1)
When the camera and
TV
are connected by both
an
AV cable and an HDMI cable, the HDMI cable
will take priority.
(l)
Depending
on
the TV's settings, the displayed images and information may become cropped
Selecting
the
digital
video
signal
format
for
connecting
to
a TV via
an
HDMI
cable
[HDMI]
~
SETUP
~
HDMI
(l)
"To
play back camera images
on
a TV"
(p.
55)
Submenu 2
480p
nop
1080i Images are played back
in
1080i format.
Application
(l} When set to [1080i], 1080i format takes priority for HDMI output. However, if this setting does not
match the input setting
of
the
TV,
the resolution is changed first to
nop
and then to 480p. For details
on
changing the input setting
of
the
TV,
refer to the TV's instruction manual.
Displaying
the
brightness
distribution
[[jjj}]
~SETUP~~
Submenu 2
OFF
c:c.
No histogram is displayed.
ON
DIRECT
A histogram
(a
brightness distribution as a guide for determining the exposure) is displayed.
White-out areas are displayed as red, and black-out areas are displayed as blue directly
on
the image.
(l)
"Changing the shooting information display" (p. 25), "Changing the image information display" (p. 27)
Registering
a
set
of
shooting
settings
under
my
mode
labels
[MY
MODE
SETUP]
» SETUP
~
MY MODE SETUP
Subrnenul
SUbmenu!··
.....
1'~ubmenu4
<"-,
Application
A._.
CURRENT
(My'j1
MY MODE 1/
SET/CANCEL
[SET] sets the current menu function settings
to
the
IM~
MY MODE 2/
selected my mode label
(IM:J1/fM~/IM:.PJ/IM:J4).
RESET
fM:.PJ
MY MODE 3/
RESET/CANCEL
[RESET] returns the functions
in
the selected my
IM:J4
MY MODE 4
mode label to their defaults.
Taking pictures using "MY MODE"
CD
Set the mode dial to
IM:J.
(2)
Select the desired mode from
1M:J1
to
fM:J4.
"Using
the
FUNC
menu" (p.
26)
56
EN
To Next Page
Loading...
