2 Turn on the wireless flash.
Taking
pictures
with
the
Olympus
Wireless
RC
Flash
System
1 Set the wireless flash based
on
the
guidelines
~elow.
Wireless flash setup range guidelines
The setup range varies depending on the
ambient environment.
---
Flash direction
Point the remote
sensor toward
the camera
You
can take pictures with a wireless flash
when using a flash compatible with the Olympus
Wireless
RC
Flash System. This enables
multi-flash photography using multiple flash
units compatible with this system. The camera's
built-in flash is used for communication between
the camera and flash.
For details about operation
of
a wireless
flash, refer to the instruction manual for the
special external flash.
Using
a
microSD
Attachment
Handling precautions
Do not touch the contact area of the
attachment
or
microSD card. Doing so
may cause failure
in
reading the images.
When fingerprints or stains are found on
the contact area, wipe the area with a soft
dry cloth.
Do not use the attachment with Olympus
digital cameras that do not support this
microSD Attachment, as well as with other
brands
of
digital cameras, computers,
printers and other devices that support
xD-Picture Card. Doing so not only may
damage the pictures taken, but may also
result
in
the malfunction
of
the device.
If the microSD card cannot be removed,
do not use force. Contact authorized
distributors/service centers.
Sending
images
You
can send images to a computer or
PictBridge compatible printer by using the
USB cable provided with the camera.
To
send data to other devices, remove
the attachment from the camera and use
a commercially available microSD card
adapter.
Cards compatible
with
this camera
microSD card
microSDHC card
For a list
of
tested microSD cards, please
visit our website (http://www.olympus.com/).
3 Use the MODE button on the
wireless flash to set to
RC
mode,
and make the channel and group
settings.
•
The
group
is
set
to
A.
(The
Band C settings
do
not work.)
4 Turn
on
the camera, and press the
~
button to flip up the built-in flash.
5 Set [=IIlFLASH] (p. 36) on the
camera to
[~RC],
and set the
channel (CH1 to CH4) to the same
setting as the wireless flash.
74
EN
To Next Page
Loading...
