18
En
Use the AV cable provided with the camera to playback recorded images on your TV.
Both still pictures and movies can be played back.
1 Make sure that the TV and camera are turned off. Connect the multi-connector
on the camera to the video and audio input terminals on the TV using the
provided AV cable.
2 Turn the TV on and set it to the video input mode.
For details of switching to video input, refer to your TV’s instruction manual.
3 Set the mode dial to q and press the o button to turn the camera on.
The last picture taken is displayed on the TV. Use the arrow pad (O/N/X/Y) to select
the picture you want to display.
CONNECTING THE CAMERA
Playback on a TV
AV cable
Multi-connector
Connect to the TV’s video
input (yellow) and audio
input (white) terminals.
Connector cover
Pull the connector cover
forward and then turn it.
d4266_e_basic_00_bookfile_7.book Page 18 Thursday, September 29, 2005 1:17 PM
To Next Page
Loading...
