19
En
Using the provided USB cable, you may connect your camera directly to a PictBridge
compatible printer such as the Olympus P-11 to make prints. You can print a picture
with simple operations.
1 In playback mode, display the picture you want to print out on the monitor.
2 Connect one end of the provided USB cable into the camera’s multi-connector
and the other end into the printer’s USB connector.
3 Turn on the printer’s power.
4 Press the < button.
Printing starts.
Do not disconnect the USB cable while printing
pictures.
Direct Printing (PictBridge)
USB Cable< Button
Multi-Connector
Connector cover
Pull the connector cover
forward and then turn it.
OK
PC / CUSTOM PRINT
EASY PRINT START
d4266_e_basic_00_bookfile_7.book Page 19 Thursday, September 29, 2005 1:17 PM
To Next Page
Loading...
