Olympus SP-700 - Printing Pictures (EASY PRINT)

Direct printing (PictBridge)
116
7
Printing pictures
Use the provided USB cable to connect the camera to a PictBridge-compatible
printer.
[EASY PRINT] can be used to print out the picture displayed on the monitor.
1 Power on the printer.
2 In playback mode, display the picture your want to print out
on the monitor.
3 Connect one end of the provided
USB cable into the camera’s
multi-connector and the other end
into the printer’s USB connector.
• Pull the connector cover forward and
then turn it.
• The [EASY PRINT START] screen is
displayed.
• For details of how to turn the printer on
and the position of the USB port, refer to
the printer’s instruction manual.
4 Press the < button.
• Printing starts.
• When printing is finished, the picture
selection screen is displayed. To print
another picture, press XY to select a
picture, and press the < button.
• When you are finished, disconnect the
USB cable from the camera. Do not
disconnect the USB cable while printing
pictures.
Printing pictures (EASY PRINT)
Multi-connector
Connector
cover
OK
PC / CUSTOM PRINT
EASY PRINT START
PRINTEXIT