38
EN
Automatically rotating images shot with
Automatically rotating images shot with
the camera in a vertical position during
the camera in a vertical position during
playback [Pic Orientation]
playback [Pic Orientation]
z
(Camera Menu 2) Pic Orientation
During shooting, the [y] (p. 42) setting on the
playback menu is set automatically.
This function may not work properly if the camera is
facing up or down during shooting.
Submenu 2 Application
Off
Information about the vertical/
horizontal orientation of the camera
during shooting is not recorded with
images. Images shot with the camera
in a vertical position are not rotated
during playback.
On
Information about the vertical/
horizontal orientation of the camera
during shooting is recorded with
images. Images are automatically
rotated during playback.
Displaying icon guides [Icon Guide]
Displaying icon guides [Icon Guide]
z
(Camera Menu 2) Icon Guide
Submenu 2 Application
Off No icon guide is displayed.
On
The explanation of the selected icon
will be displayed when a shooting
mode or function menu icon is
selected (position the cursor on
the icon for a while to display the
explanation).
Icon guide
MENUMENU
The flash fires automatically
in low light.
Flash Auto
0.00.0
14
M
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
Imprinting the date of recording
Imprinting the date of recording
[Date Stamp]
z
(Camera Menu 2) Date Stamp
Submenu 2 Application
Off Do not imprint the date.
On
Stamp new photographs with the
date of recording.
When the date and time are not set, [Date Stamp]
cannot be set.
“Language, date, time and time zone” (p. 15)
The date stamp can not be deleted.
[Date Stamp] is not available in [Panorama] (p. 26) or
[3D Photo] (p. 28) mode.
When drive settings (p. 32) are set to other than [o],
[Date Stamp] cannot be set.
To Next Page
Loading...
