Menu operations
38 EN
• When [X] has not been set, [ALARM CLOCK] is not available.
• When [SILENT MODE] is set to [ON], the alarm will not sound.
• When [DUALTIME] is set to [ON], the alarm sounds according to the dual time date and
time setting.
Setting an alarm
• Select [ONE TIME] or [DAILY], and set the alarm time.
• You can set snooze or alarm sounds and volume.
Operating, shutting off and checking the alarm
• Operating the alarm:
Turn off the camera. The alarm only operates when the camera is off.
• Shutting off the alarm:
While the alarm is sounding, press any button to shut off the alarm and turn off the camera.
Note that pressing o will turn the camera on.
When [SNOOZE] is [OFF], the alarm stops automatically and the camera turns off after 1
minute of no operation.
• Checking the alarm settings:
While the camera is off, press g/E to display the current and alarm set times. Times
will be displayed for 3 seconds.
ALARM CLOCK .............................................................................. Setting alarms
OFF
No alarm is set or alarm is canceled.
ONE TIME
Alarm is activated once. After the alarm goes off, the setting is canceled.
DAILY
Alarm is activated daily at the set time.
TIME
Sets the alarm time.
SNOOZE OFF
No snooze is set.
ON
Alarm is activated every 5 minutes, up to 7 times.
SOUND TYPE 1 / 2 / 3
VOLUME LOW / HIGH
ng alarms
ALARM CLOCK
EXIT SET
TIME
SNOOZE
SOUND TYPE
VOLUME
d4344_4356_e_0000.book Page 38 Monday, December 17, 2007 9:13 AM
To Next Page
Loading...
Need help?
General
