Playback on a TV
105
4
Continued on next page
Viewing still pictures
Playback mode settings
Press or to select NTSC
or PAL and press the OK button.
The video signal type is set.
Press the OK button again to exit
the menu.
Make sure that the camera and the TV are off.
Plug the AV cable into the A/V
OUT jack on the camera.
A/V OUT: Abbreviation for the audio
and video output jacks (Audio/Video
Out).
Plug the AV cable into the TV
video (yellow) and audio (white)
input jacks.
For information on your TV audio/video input jacks, refer to your manual of
the TV.
PAL
PLAY
EDIT
CARD
VIDEO OUTVIDEO OUT
NTSC
SETUP
A/V OUT jack
AV cable
AV cable
(white)
AV cable
(yellow)
To Next Page
Loading...
