Olympus STYLUS 600 - Direct Printing (Pictbridge)

18
En
Using the provided USB cable, you may connect your camera directly to a PictBridge
compatible printer such as the Olympus P-11 to make prints.
1 Connect one end of the provided USB cable into the camera’s multi-connector
and the other end into the printer’s USB connector.
2 Select [CUSTOM PRINT] on the camera’s
monitor and press Z.
After the [ONE MOMENT] screen disappears, the
camera and printer are connected.
Select [EASY PRINT] to make just one print of the
selected picture quickly.
3 Use the arrow pad (O/N/X/Y) to select
pictures and make prints.
Direct Printing (PictBridge)
USB Cable
Multi-Connector
P C
USB
OK
CUSTOM PRINT
EXIT
EASY PRINT
SELECT GO
PRINT
ALL PRINT
MULTI PRINT
ALL INDEX
SELECT EXIT
OK
GO
PRINT MODE SELECT
Follow the operation guide displayed
here.
d4262_oima_e_basic_00_bookfile_7.book Page 18 Tuesday, August 2, 2005 10:54 AM