The date and time set here are saved to image
file names, date prints, and other data.
1 Press the
ON/OFF
button to turn on
the camera.
• The date and time setting screen is displayed
when the date and time are not set.
~.
ON/OfF
Date and time setting screen
2 Use MW to select the year for [V).
3 Press Dto save the setting for [V).
4 As
in
steps 2 and
3,
use
~
w~lJ
and the @ button to set
[M) (month), [D) (day), and
[TIME) (hours and minutes), and
[VI
MID)
(date order).
• For precise time setting, press the @ button
as the time signal strikes 00 seconds.
•
To
change the date and time, adjust the
setting from the menu.
[E9l (Date/time)
(p.46)
To
check the date and time
Press the
DISP.
button while the camera is
turned off. The current time
is
displayed for
approx. 3 seconds.
The language for the menu and error messages
displayed on the monitor is selectable.
1 Press the MENU button, and press
.G\W~D
to select
[~)
(SETUP).
2 Press the @ button.
EN
The date and time set here are saved to image
file names, date prints, and other data.
1 Press the
ON/OFF
button to turn on
the camera.
• The date and time setting screen is displayed
when the date and time are not set.
~.
ON/OfF
Date and time setting screen
2 Use MW to select the year for [V).
3 Press Dto save the setting for [V).
4 As
in
steps 2 and
3,
use
~
w~lJ
and the @ button to set
[M) (month), [D) (day), and
[TIME) (hours and minutes), and
[VI
MID)
(date order).
• For precise time setting, press the @ button
as the time signal strikes 00 seconds.
•
To
change the date and time, adjust the
setting from the menu.
[E9l (Date/time)
(p.46)
To
check the date and time
Press the
DISP.
button while the camera is
turned off. The current time
is
displayed for
approx. 3 seconds.
The language for the menu and error messages
displayed on the monitor is selectable.
1 Press the MENU button, and press
.G\W~D
to select
[~)
(SETUP).
2 Press the @ button.
EN
To Next Page
Loading...
