Adjust
the
settings
for
the functions
while
referring
to
"Using
the Menu" (p.
3).
Selecting
the
video
signal
system
to
match
your
TV[VIDEO OUT]
,::~~;;§5::1JJg
!'E,,:::~~~~!=~:~"::::!::;;;;:;:;<:::;;=::::::;.:~;;;;-.=,;;;=:::;::::::::::==:::::;::::::;;~==:::,,:::::::::::::::.:::=:::::,:;::::::::::::;;,'==:::::
• The
TV
video signal system varies depending on the countries and regions, Before viewing camera
images on your
TV,
select the video output according to your TV's video signal type,
Connecting the camera to a TV
in
North America, Taiwan, Korea, Japan,
and
so
on
Connecting the camera to a TV
in
European countries, China,
and
so
on
The factory default settings differ according to the region where the camera is sold.
To
play
back
camera
images
on
a TV
(1)
Connect the
TV
and camera,
Connect to the TV video
input jack (yellow)
and
audio input jack (white)
AV
cable (supplied)
Multi-connector
Connector cover
@ Use the camera to select the same video signal system as the one of connected
TV
([NTSC]/
[PAL]),
(~)
Turn
on
the
TV,
and change "INPUT" to "VIDEO (an input jack connected to the camera)."
• For details on changing the input source
of
the
TV,
refer to the TV's instruction manual.
C~';
Set the mode dial to
EEJ,
and use
Jlii\.
~C!.!J
to select the image for playback.
CD
Depending on the TV's settings, the displayed images and information may become cropped,
EN
Adjust
the
settings
for
the functions
while
referring
to
"Using
the Menu" (p.
3).
Selecting
the
video
signal
system
to
match
your
TV[VIDEO OUT]
,::~~;;§5::1JJg
!'E,,:::~~~~!=~:~"::::!::;;;;:;:;<:::;;=::::::;.:~;;;;-.=,;;;=:::;::::::::::==:::::;::::::;;~==:::,,:::::::::::::::.:::=:::::,:;::::::::::::;;,'==:::::
• The
TV
video signal system varies depending on the countries and regions, Before viewing camera
images on your
TV,
select the video output according to your TV's video signal type,
Connecting the camera to a TV
in
North America, Taiwan, Korea, Japan,
and
so
on
Connecting the camera to a TV
in
European countries, China,
and
so
on
The factory default settings differ according to the region where the camera is sold.
To
play
back
camera
images
on
a TV
(1)
Connect the
TV
and camera,
Connect to the TV video
input jack (yellow)
and
audio input jack (white)
AV
cable (supplied)
Multi-connector
Connector cover
@ Use the camera to select the same video signal system as the one of connected
TV
([NTSC]/
[PAL]),
(~)
Turn
on
the
TV,
and change "INPUT" to "VIDEO (an input jack connected to the camera)."
• For details on changing the input source
of
the
TV,
refer to the TV's instruction manual.
C~';
Set the mode dial to
EEJ,
and use
Jlii\.
~C!.!J
to select the image for playback.
CD
Depending on the TV's settings, the displayed images and information may become cropped,
EN
To Next Page
Loading...
