Olympus STYLUS TOUGH-8000 - Page 48

Saving battery power between shots
[POWER SAVE}
... ~ sSI-!:J eJtgp~ER SA'ZS._. '-,::::::=-,,--::=:::=
ON
Cancels [POWER SAVE].
When the camera is not being
used for approx. 10 seconds, the
monitor automatically turns off to
save battery power.
Displaying the current altitude/
water depth (atmospheric/hydraulic
pressure) [MANOMETER}
~SEIUeJI~'-MANOMETER __ ._~. __ ._._
-..._"""" .. -, •• __ • __ ._- __ N~ __ <"' __ ,. '" < _---=_" ... ..,.."'''-, ..... <., _.......-
The readings may have a margin of error
depending on meteorological conditions.
Use the readings only for your reference.
Cancels the manometer display.
Using the LED illuminator as an
auxiliary light [LED ILLUMINATOR}
':..~ ;.?£"IUI?:_~ED.JLWMLNAIQR,---_
CD When set to [ON], a warning message
appears in the monitor as a water depth
close to 10 m (32.8 ft) is reached.
To adjust the altitude/water depth
display
cD Use ~~ to select the current altitude/
water depth, and press the @ button to
set.
Proceed to the setting screen.
See below.
Displays the current altitude/
water depth (atmospheric/
hydraulic pressure)
in the
shooting standby mode screen.
(-10 m to 5,000 m)
-------
CALIBRATE
ON
Enables the LED illuminator.
Disables the LED illuminator.
CD "Using the LED illuminator" (p. 24)
To resume standby mode
Press any button or turn the mode dial.
ON
Selecting the display units for the
manometer[m/ft}
,~~-S~Tl'E.·~ p?£tt.':.~~;:,.::~::::;::::';.~;",::,;;;=:;:::=:;;:~,::
This displays in meters.
This displays
in feet.
EN
Saving battery power between shots
[POWER SAVE}
... ~ sSI-!:J eJtgp~ER SA'ZS._. '-,::::::=-,,--::=:::=
ON
Cancels [POWER SAVE].
When the camera is not being
used for approx. 10 seconds, the
monitor automatically turns off to
save battery power.
Displaying the current altitude/
water depth (atmospheric/hydraulic
pressure) [MANOMETER}
~SEIUeJI~'-MANOMETER __ ._~. __ ._._
-..._"""" .. -, •• __ • __ ._- __ N~ __ <"' __ ,. '" < _---=_" ... ..,.."'''-, ..... <., _.......-
The readings may have a margin of error
depending on meteorological conditions.
Use the readings only for your reference.
Cancels the manometer display.
Using the LED illuminator as an
auxiliary light [LED ILLUMINATOR}
':..~ ;.?£"IUI?:_~ED.JLWMLNAIQR,---_
CD When set to [ON], a warning message
appears in the monitor as a water depth
close to 10 m (32.8 ft) is reached.
To adjust the altitude/water depth
display
cD Use ~~ to select the current altitude/
water depth, and press the @ button to
set.
Proceed to the setting screen.
See below.
Displays the current altitude/
water depth (atmospheric/
hydraulic pressure)
in the
shooting standby mode screen.
(-10 m to 5,000 m)
-------
CALIBRATE
ON
Enables the LED illuminator.
Disables the LED illuminator.
CD "Using the LED illuminator" (p. 24)
To resume standby mode
Press any button or turn the mode dial.
ON
Selecting the display units for the
manometer[m/ft}
,~~-S~Tl'E.·~ p?£tt.':.~~;:,.::~::::;::::';.~;",::,;;;=:;:::=:;;:~,::
This displays in meters.
This displays
in feet.
EN