Q) When one
of
the messages below is
displayed on the monitor, check the
corrective action.
[0
THE
IMAGE
CANNOT
BE EDITED
Problem
with
selected image
Use photo retouch software, etc.
to edit the image on a computer.
'1 Before erasing important images, download them to
a computer.
'2
All data will be erased.
'3
This
is
displayed, for instance, when the printer's
paper tray has been removed. Do not operate
the printer while making the print settings
on
the
camera.
'4
This camera may be unable to print images taken by
other cameras.
[0
CARD ERROR
[0
WRITE
PROTECT
ill
MEMORY FULL
[0
CARD FULL
, ,
o ,
NO PICTURE
[0
PICTURE
ERROR
EN
Card problem
Insert a new card.
Card problem
Use a computer
to
cancel the
read-only setting.
Internal
memory
problem
• Insert a card.
• Erase unwanted images."
Card problem
• Replace the card.
• Erase unwanted
images:
1
Card
problem
• Use iiii\
~
to select [CLEAN
CARD], and press the
@ button. Take out the card,
wipe the contact area
(p.
66)
with a soft, dry cloth, and then
load the card again.
• Use
ff;l.
~
to select
[FORMAT), and press the
@ button. Next, use iiii\
~
to select [YES], and press the
@ button."2
Internal memory problem
Use Q W to select [MEMORY
FORMAT], and press the
@ button. Next, use
ffi2\
~
to select [YES], and press the
@ button.'2
Internal memory/Card problem
Take pictures before viewing
them.
Problem
with
selected image
Use photo retouch software,
etc. to view the image
on
a
computer. If the image still
cannot be viewed, the image file
is
corrupted.
OJ
CARD-COVER
OPEN
c:::l
BATTERY
EMPTY
®.x
NO
CONNECTION
Iii
NO
PAPER
~
~
NO
INK
8J\r
JAMMED
SETTINGS
CHANGED'3
JIb
PRINT ERROR
[0
CANNOT PRINT'4
Operation problem
Close the battery/card
compartment cover.
Battery problem
Charge the battery.
Connection problem
Connect the camera and
computer
or
printer correctly.
Printer problem
Load paper into the printer.
Printer problem
Refill the ink
in
the printer.
Printer
problem
Remove the jammed paper.
Printer
problem
Return to the status where the
printer can be used.
Printer problem
Turn off the camera and printer,
check the printer for any
problems, and then turn the
power on again.
Problem
with
selected image
Use a computer to print.
Q) When one
of
the messages below is
displayed on the monitor, check the
corrective action.
[0
THE
IMAGE
CANNOT
BE EDITED
Problem
with
selected image
Use photo retouch software, etc.
to edit the image on a computer.
'1 Before erasing important images, download them to
a computer.
'2
All data will be erased.
'3
This
is
displayed, for instance, when the printer's
paper tray has been removed. Do not operate
the printer while making the print settings
on
the
camera.
'4
This camera may be unable to print images taken by
other cameras.
[0
CARD ERROR
[0
WRITE
PROTECT
ill
MEMORY FULL
[0
CARD FULL
, ,
o ,
NO PICTURE
[0
PICTURE
ERROR
EN
Card problem
Insert a new card.
Card problem
Use a computer
to
cancel the
read-only setting.
Internal
memory
problem
• Insert a card.
• Erase unwanted images."
Card problem
• Replace the card.
• Erase unwanted
images:
1
Card
problem
• Use iiii\
~
to select [CLEAN
CARD], and press the
@ button. Take out the card,
wipe the contact area
(p.
66)
with a soft, dry cloth, and then
load the card again.
• Use
ff;l.
~
to select
[FORMAT), and press the
@ button. Next, use iiii\
~
to select [YES], and press the
@ button."2
Internal memory problem
Use Q W to select [MEMORY
FORMAT], and press the
@ button. Next, use
ffi2\
~
to select [YES], and press the
@ button.'2
Internal memory/Card problem
Take pictures before viewing
them.
Problem
with
selected image
Use photo retouch software,
etc. to view the image
on
a
computer. If the image still
cannot be viewed, the image file
is
corrupted.
OJ
CARD-COVER
OPEN
c:::l
BATTERY
EMPTY
®.x
NO
CONNECTION
Iii
NO
PAPER
~
~
NO
INK
8J\r
JAMMED
SETTINGS
CHANGED'3
JIb
PRINT ERROR
[0
CANNOT PRINT'4
Operation problem
Close the battery/card
compartment cover.
Battery problem
Charge the battery.
Connection problem
Connect the camera and
computer
or
printer correctly.
Printer problem
Load paper into the printer.
Printer problem
Refill the ink
in
the printer.
Printer
problem
Remove the jammed paper.
Printer
problem
Return to the status where the
printer can be used.
Printer problem
Turn off the camera and printer,
check the printer for any
problems, and then turn the
power on again.
Problem
with
selected image
Use a computer to print.
To Next Page
Loading...
