Olympus SZ3060 - Before Use; Operation; Care and Storage

BEFORE USE 1
Operation
(1)
As the microscope is a piece of precision equipment, always handle with care, avoiding abrupt
movement or impact during transportation or operation of controls.
(21
Aveld exposure to drrect sunl~ght, high temperature and hum~dity, dust and vibration.
(3)
Avoid leaving dirt or f~ngerpr~nts on rhe lens surfaces, as a dirty mirror or lenses may reduce
Image clarltv.
(4)
Never turn the right and left zoom control knobs in oppos~te direct~ons, as malfunction may
result.
Care and Storage
1 ) Clean all glass components by wiping gently w~th gauze. To remove f~ngerprints or ail smudges,
wipe w~th gauze slightly rno~szened with a mixture of ether (70%) and aicohol (30%).
A Since solvents such as ether and alcohol are highly flammable, they must be handled
carefully. Be
sure to keep these chemicals away from open flames or potential sources of
electrical sparks - for example, electrical equipment that is being switched on or off.
Also remember to always use these chemicals only in a welt-ventilated room.
12)
Do not use organic solut~ons to wipe the surfaces of other components Plastic parts especially,
should be cleaned w~th a neutral detergent.
(3)
Never attempt to disassemble the microscope as decreased performance may result
14) When not in use, be sure to cover the microscope with the dust cover provided, and store in
an area free from moisture to prevent rust.