To Next PageTo Next PageWhy does zooming cause defocusing on my Olympus Microscope?
If zooming causes defocusing of the observed image on your Olympus Microscope, it might be due to an improperly adjusted eyepiece diopter or inaccurate focus adjustment. To resolve this, adjust the eyepiece diopter and ensure the focus is accurately set.
Why does zooming cause defocusing of the monitor image on my Olympus SZ51?
If zooming causes significant defocusing of the monitor image on your Olympus Microscope, the confocality of the camera may be adjusted improperly. You should adjust it properly.
Why is there dirt in the view of my Olympus SZ51 Microscope?
If you see dirt or dust in the field of view of your Olympus Microscope, it might be due to dirt/dust on the specimen. Clean the specimen thoroughly.
What to do if the monitor image is cut off on Olympus Microscope?
If the right field of view or the monitor image is cut off on your Olympus Microscope, the light path selector lever may not be set properly to a stop position. Push in or pull out the lever all the way until it reaches the stop position.
How to fix a focus knob that doesn't rotate smoothly on Olympus Microscope?
If the focus adjustment knob on your Olympus Microscope does not rotate smoothly, the rotation tension of the knob might be set too high. Decrease the rotation tension to an optimum level.
What to do if my Olympus SZ51 Microscope drops spontaneously?
If your Olympus Microscope body drops spontaneously, causing the focusing to deviate during observation, it's likely that the rotation tension of the knob is set too low. Increase the rotation tension to an optimum level.
General| Brand | Olympus |
|---|---|
| Model | SZ51 |
| Category | Microscope |
| Language | English |
Essential safety guidelines and precautions for operating the microscope.
Initial steps and considerations before operating the microscope for the first time.
Steps to prepare the microscope and workspace before starting observation.
Step-by-step guide for the actual process of observing a specimen under the microscope.
Instructions for using the stage plate and adjusting focus knob tension on the microscope base.
Procedures for adjusting interpupillary distance and eyepiece diopter for optimal viewing.
Guidance on using eye shades for comfort and preventing extraneous light entry.
Instructions for inserting and using eyepiece micrometer disks for measurement.
How to attach and use auxiliary objectives for modifying magnification and working distance.
Procedure for selecting the light path for binocular or TV camera observation on the SZ61TR.
Steps to ensure proper focus alignment between the observation image and the TV monitor.
Visual representation showing the order and connection of microscope modules during assembly.
Instructions for installing the microscope body and mounting the stage plate.
Procedure for attaching a TV camera to the SZ61TR microscope, including C-mount installation.
Details on the SZX-STAD1 adapter for mounting rotary stages and its applicable bases.
Overview of the SZH-STAD1 adapter, its function, and compatibility with BH2-SH stages.
Introduction to the SZ2-FO stage, its system chart, and mountable modules.
Identification of the components and features of the SZ2-FO Up/Down Moving Stage.
Step-by-step guide for installing and operating the SZ2-FO Up/Down Moving Stage.
Lists bases compatible with the SZ2-FO stage and any associated restrictions.
Description of the SZH-SG Gliding Stage, including its external view and nomenclature.
Instructions for installing and using the SZH-SG Gliding Stage, including movement operations.
Introduction to the SZH-SC Cup Stage, its nomenclature, and limitations.
Step-by-step guide for mounting and using the SZH-SC Cup Stage, with operational precautions.
