To Next PageTo Next PageWhy does zooming cause defocusing on my Olympus SZ61-60 Microscope?
If zooming causes defocusing of the observed image on your Olympus Microscope, it might be due to an improperly adjusted eyepiece diopter or inaccurate focus adjustment. To resolve this, adjust the eyepiece diopter and ensure the focus is accurately set.
Why does zooming cause defocusing of the monitor image on my Olympus SZ61-60 Microscope?
If zooming causes significant defocusing of the monitor image on your Olympus Microscope, the confocality of the camera may be adjusted improperly. You should adjust it properly.
Why is there dirt in the view of my Olympus Microscope?
If you see dirt or dust in the field of view of your Olympus Microscope, it might be due to dirt/dust on the specimen. Clean the specimen thoroughly.
What to do if the monitor image is cut off on Olympus Microscope?
If the right field of view or the monitor image is cut off on your Olympus Microscope, the light path selector lever may not be set properly to a stop position. Push in or pull out the lever all the way until it reaches the stop position.
How to fix a focus knob that doesn't rotate smoothly on Olympus SZ61-60 Microscope?
If the focus adjustment knob on your Olympus Microscope does not rotate smoothly, the rotation tension of the knob might be set too high. Decrease the rotation tension to an optimum level.
What to do if my Olympus SZ61-60 drops spontaneously?
If your Olympus Microscope body drops spontaneously, causing the focusing to deviate during observation, it's likely that the rotation tension of the knob is set too low. Increase the rotation tension to an optimum level.
General| Brand | Olympus |
|---|---|
| Model | SZ61-60 |
| Category | Microscope |
| Language | English |
List of available eyepiece models for the SZ2 series.
List of SZ2 series microscope body models.
Details on threads for mounting optional auxiliary objectives.
Description of stage plate options including ESD protection.
Information on the standard base model SZ2-ST.
Steps to prepare the microscope before observation.
Step-by-step guide for using the microscope for observation.
Operations related to the microscope base, including stage plate and focus knob tension.
Operations for the microscope body: interpupillary distance, diopter, magnification stoppers, eye shades, micrometer disk, auxiliary objectives, light path selection, and TV camera confocality.
Visual guide showing the sequence of microscope assembly steps.
Step-by-step instructions for assembling microscope components.
Details on the SZX-STAD1 adapter for mounting rotary stages, including introduction, applicable bases, restrictions, and installation.
Information on the SZH-STAD1 adapter, similar to SZX-STAD1, for BH2-SH horizontal knob stage.
Details about the SZ2-FO Up/Down Moving Stage, its system chart, external view, installation, operation, and applicable bases.
Information and installation for the SZH-SG Gliding Stage, including external view and operation.
Details on the SZH-SC Cup Stage, its installation, operation, and external view.
