39
EN
ISO sensitivity Sets the ISO sensitivity.
l
ISO Auto
The camera automatically sets the sensitivity with
priority on image quality.
m
High ISO Auto
The camera automatically sets the sensitivity with
priority on minimizing blur caused by a moving
subject or by camera shake.
Q
to
#
Value
Set a smaller value to reduce noise in the picture, or
a larger value to reduce blur.
o
/
Y
Sets the sequential shooting function and the
time from pressing the shutter button until the
picture is taken.
o
Single
One frame is shot each time the shutter button is
pressed.
j
Sequential
The images are taken sequentially for 100 frames at
up to about 5 frames per second (fps) while pressing
down the shutter button all the way down.
c
High-Speed1
The images are taken sequentially for up to
100 frames at about 15 frames per second (fps)
while pressing down the shutter button all the way
down.
d
High-Speed2
The images are taken sequentially for up to
100 frames at about 60 frames per second (fps)
while pressing down the shutter button all the way
down.
Y
12
Y
12 sec
The self-timer lamp turns on for approx. 10 seconds,
then blinks for approx. 2 seconds, and then the
picture is taken.
Y
2
Y
2 sec
The self-timer lamp blinks for approx. 2 seconds,
then the picture is taken.
Y
C
Custom
Self-timer
Photographs are taken at “the number of frames,
the time from pressing the shutter button until the
picture is taken, and the interval time” which you set.
To Next Page
Loading...
