73
EN
Before using GPS function (A-GPS data)
Depending on the status of the camera and communication, it may take
time to acquire the position information. When the A-GPS is used, the
position determination time can be shortened from a few seconds to a few
tens of seconds. The A-GPS data can be updated using the smartphone
app “OLYMPUS Image Track” (OI.Track) or the PC software “OLYMPUS
A-GPS Utility”.
• Make sure that the camera date is set correctly.
• Set the camera to private connection (P. 70).
• A-GPS data must be updated every 4 weeks.
The position information may have changed when time has elapsed after
updating the data. Use as new A-GPS data as possible.
• The provision of A-GPS data may be terminated without prior notice.
Updating the A-GPS data using a smartphone
Before update, install the smartphone app “OLYMPUS Image Track” (OI.
Track) on your smartphone. Refer to the URL below for details on how to
update the A-GPS data.
http://oitrack.olympus-imaging.com/
Connect the camera and the smartphone, following the procedure
described in “Connecting to a smartphone” (P. 67).
Updating the A-GPS data using a PC
Download the OLYMPUS A-GPS Utility software from the URL below, and
install it on your PC.
http://sdl.olympus-imaging.com/agps/
Refer to “OLYMPUS A-GPS Utility Instruction Manual” on the website with
above URL for details on how to update the data.
Error message during Wi-Fi connection
Connect the camera to the smartphone again. g P. 67
To Next Page
Loading...
