Olympus TG-4 - GPS and Electronic Compass Usage; Using GPS Function (GPS Settings); Using the Electronic Compass

74 EN
Using GPS function (GPS Settings)
1
Select [GPS Settings] in the d Settings Menu 3 (P. 64) and press
A.
2
Select [GPS] and press A.
3
Select [On] and press A.
• G flashes during measurement. When
the position measurement ends, G will
appear and the position information will be
displayed.
• Once the position measurement has ended,
position information will be added to the
pictures at the time of shooting.
PP
0:340:34
44
N ORM
GPS
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
4:3
16 M
i
• Do not cover the GPS antenna with your hands or metal objects.
• If you are using the GPS function for the first time and the A-GPS has not
been updated, or if the function has not been used for a long time, it may take
a few minutes for the position measurement to end.
• Latitude and longitude are displayed on the shooting screen. If you do not
wish to add position information, set [GPS] to [Off].
• Position information is not added to movies.
• When the [GPS] is set to [On], the battery will run down faster.
Using the electronic compass (Measurement position information
screen)
1 Press and hold the INFO button while the shooting screen is displayed.
• A measurement position information screen appears.
OK
Updated 1 min ago
MENU
2015/02/26
12:30
Latitude/Longitude
N123°56' 78''
E123°56' 78''
Barometer
880hpa
Altitude/Water Depth
1200m
LOG
Update GPS
Back
2
1
5
6
3
4
7
8
1 Electronic compass
2 Update status
3 GPS tracking active
4 Latitude
5 Longitude
6 Atmospheric/Hydraulic pressure (P. 61)
7 Altitude/Water depth (P. 61)
8 Current date and time
• The displays change in the order of Normal  Detailed  No info. 
Measurement position information each time the INFO button is pressed.