98
EN
Increasing the number of pictures that can be taken
Either erase unwanted images, or connect the camera to a computer or other
device to save the images, and then erase the images in the internal memory or
card.
[Erase] (P. 13, 54), [Sel. Image], [All Erase], [Erase Group] (P. 54), [Memory Format]/
[Format] (P. 56)
Using separately sold accessories
Taking pictures with the Olympus Wireless RC Flash
System
You can take pictures and underwater pictures with a wireless flash when using a
flash compatible with the Olympus Wireless RC Flash System.
The guideline of the setup range in wireless flash shooting is from 1 to 2 m,
however note that it varies depending on the ambient environment.
• The camera’s built-in flash is used for communication between the camera
and flash.
• To use a dedicated underwater strobe, prepare an underwater case, a fiber-
optic cable and so on.
• For details about operation of a wireless flash and an underwater strobe, refer
to the instruction manual for a special external flash or an underwater case.
1
Turn on the dedicated strobe.
2
Set the flash mode of the dedicated strobe to RC mode.
When you have to set a channel and a group, select CH1 for the channel, A
for the group.
3
Set [Remote Flash] (P. 46) on the camera to [#RC].
4
Select the flash option in the function menu, and then select
[#RC] (remote control).
• “Flash” (P. 30)
5
Take a test shot to check the operation of the flash and the
resulting image.
• Be sure to check the charge level of the camera and wireless flash before
taking pictures.
To Next Page
Loading...
