57
EN
57
EN
For the operation method, refer to (P. 42).
Using an Eye-Fi card d [Eye-Fi]
Submenu 2 Application
All Transfers all images.
Sel. Image Transfers only selected image.
Off Disable Eye-Fi communication.
• When using an Eye-Fi card, read the Eye-Fi card instruction manual carefully,
and comply with the instructions.
• Use the Eye-Fi card in compliance with the laws and regulations of the
country where the camera is used.
• In locations such as on an airplane, where the Eye-Fi communication is
prohibited, remove the Eye-Fi card from the camera, or set [Eye-Fi] to [Off].
• This camera does not support the Eye-Fi card’s Endless mode.
Saving custom settings d [Custom Mode Setup]
Submenu 2 Submenu 3 Application
Custom
Mode 1
Set Save current settings.
Reset Return to the default setting.
Custom
Mode 2
Set
The same as Custom Mode 1.
Reset
To Next Page
Loading...
