USG-400
Installation and Connection 3-8 ISSUE1
Figure 3.6
7. Attaching the fixture plates to the compatible electrosurgical generator
attach the fixture plates that have been attached to the rear panel of the
ultrasonic generator to the compatible electrosurgical generator using three
screws for each plate (see Figure 3.7).
The fixture plates ensure tight clamping of the two generators.
Figure 3.7
8. Storing the docking plug cover
Attach the docking plug cover, which has been removed in step 3 above, to
the threaded holes for the docking plug cover on the rear panel of the
ultrasonic generator using two screws (see Figure 3.8).
To Next Page
Loading...
