Olympus VN-7000PC - Other Functions; Index Marks; Setting an Index Mark; Clearing an Index Mark

10
- -
h System sounds [ Beep ]
Informs a button operation or a wrong operation of the recorder by
sound. System sounds may be turned off.
In Menu mode selection:
Beep: Off Beep: On
Beep: On
Other functions
h Index marks
If index marks are placed, you can quickly find a location you want to listen to in fast forward and
fast rewind and when cuing a file.
Clearing an index mark:
1 While the recorder is
during recording (pause
recording) or play-
back mode, press the
FOLDER/INDEX button
to set an index mark.
1 Locate the index you
want to clear.
2 Press the 9 or 0
button to select the
index mark to delete.
3 Press the
ERASE (s )
button.
Notes:
• Index marks cannot be placed on  les created on machines other than Olympus IC recorders, but
temp marks can be placed instead to temporarily remember desired locations.
• Temp marks are temporary markings, so if you move to another  le, or connect the recorder to a
computer, they will be automatically erased.
• Up to 16 index and temp marks can be set in a  le.
• Index or temp marks cannot be set or erased in a locked  le.
Recorder’s Version
h Viewing system information [ System ]
Setting an index mark:
Version : 1.00
Index 06 Set
Index 02
Index 02 Clear
h LED [ LED ]
You can set it so the Record/Play indicator light does not turn on.
In Menu mode selection:
LED: Off LED: On
h LCD contrast adjustment [ Contrast ]
Display contrast can be adjusted in 12 levels.
In Menu mode selection:
You can adjust the LCD display
contrast level from [01] to [12].
LED: On
Contrast:Level06
You can check the recorder's information on the menu screen.