9
- -
Adjust the start/stop actuation level:
1 While the recorder is during recording mode,
press the 9 or 0 buttons to adjust the pause
sound level.
• The VCVA level can be set to any of 15 different values.
a VCVA Level
b Start level (moves to the right/left according to the set level)
h Locking files [
Lock
]
Erase lock indicator
Locking a file keeps important data from being accidentally erased.
Locked files are not erased when you choose to erase all files from
a folder.
In Menu mode selection:
Lock: Off Lock: On
Note:
• The record/play indicator light is lit during recording. When the
recorder is in Standby mode, the Record/Play indicator light ashes
and [VCVA] ashes on the display.
05m35s 00m00s
a
05m35s 00m00s
h Formatting the recorder [
Format
]
If you format the recorder, all files will be removed and all function settings will return to defaults except
date and time settings. Transfer any important files to a computer before formatting the recorder.
Notes:
• It may take up to a minute to nish the initialization. Do not remove the battery or detach the
battery compartment from the recorder during that time. Otherwise data may be damaged.
• Never format the recorder from a PC.
• When the recorder is formatted, all the stored data, including locked les, are erased.
1 The Sub Menu opens.
2 Press the 9 or 0 to
select [
Format
].
3 Press the
PLAY
/
OK
(`)
button.
• [
^]
] and [Cancel] flashes
alternately.
4 Press the 9 button to
select [
Start
].
5 Press the
PLAY
/
OK
(`)
button.
• After the [Data All Cleared]
message is on for 2 seconds,
[Sure? Cancel] will turn on.
6 Press the 9 button
again to select [
Start
].
7 Press the
PLAY
/
OK
(`)
button.
• Fo r m a t ti n g b e g i ns a n d
[Format Done] displays when
formatting ends.
Format: Cancel
To Next Page
Loading...
