Olympus WS-311M - Noise Cancel Function (Noise Cancel)

35
2
7
Press the OK button to complete
the setup screen.
If the 0 button is pressed, the setting
will be canceled and it will return to the
“Play Menu” screen.
8
Press the STOP button to close the
menu.
If the recorder goes to the menu screen
during playback, press the 0 button to
close the menu screen.
If it is set to anything other than “Off”,
will appear on the display.
a Noise Cancel indicator
03 1
22
M41S
20
HQ
05
M
10
S
a
8
7
Noise Cancel Function (Noise Cancel)
..................................................................................................................................................
Notes
• If you set Noise Cancel to “Low” or “High”, the setting remains valid until it’s set to “Off”.
• The Noise Cancel is not available when either the Voice Filter (☞ P. 36) or Playback Speed (☞ P. 84) is set.
• If the Noise Cancel is enabled, the Voice Filter and Playback Speed are not available.
Noise Cancel Function (Noise Cancel)