Olympus WS-500M - PC Connectivity and Specifications; Connecting to a PC; Disconnecting from a PC

•
Using the recorder on
YQY[~~
Windows:
Operating system:
Microsoft Windows 2000/XP/Vista
(Standard Installation)
Compatible PC's:
Windows PC's equipped with more
than one free USB port
Macintosh:
Operating system:
Mac as x10.2.8 -10.5 (Standard
Installation)
Compatible PC's:
Apple Macintosh series
equipped
with more than one free USB port
Notes:
• This is an operational environment
for saving the files recorded by
this recorder to your PC with USB
connection.
• Even if operational environment is
satisfied, we do not support such
as upgraded as, the multi-boot
environment and self-modified PC's.
1 Bootthe Pc.
2 Slide the USB connector slide lever
in the direction indicated by the
arrow to eject the USB connector
out ofthe
recorder.
3 Connect to the PC's USB port or to a
USB hub.
Windows:
When you open [My Computer],
it will be recognized by the drive
name
of the product name.
Macintosh:
When you connect the recorder
to a Mac as, it will be recognized
by
the drive name of the product
name on the desktop.
•
[Remote] is appeared on
recorder
if the USB cable is
connected.
Notes:
• Refer to the user's manual for your PC
regarding the USB port on your Pc.
• Be sure to push the cable
connector all the way in.
10 EN
Otherwise, the recorder may not
operate properly.
•
Use the supplied USB extension
cable
depending on situations.
• Do
not use USB extension cables
other than the supplied cable.
Using cables
from other
manufacturers could result in
damage to the recorder. Do not
use the supplied USB extension
cable
with devices from other
manufacturers.
•
If you are using Windows 2000,
Windows Media Player must be
installed
on the Pc.
Windows:
1 Click [ ; ] on the task bar located
at the lower-right
corner of the
screen.
Click [Safely remove
USB Mass Storage Device].
• The drive letter will differ
depending on the PC being
used.
2 When the safe to remove hardware
window appears, click [OK].
3 Disconnect the recorder from the
Pc.
Macintosh:
1 Move the drive icon for this recorder
that is appear on the desktop to the
garbage
bin by Drag & Drop it.
• When you connect the recorder
to a Mac as, it will be recognized
by
the drive name of the product
name on the desktop.
2 Disconnect the recorder from the
Pc.
Note:
• NEVER disconnect the USB while
the recording indicator light is
flashing. If you do, the data will be
destroyed.
Recording format:
WMA (Windows Media Audio)
Input level:
- 70 dBv
Sampling frequency:
[ST XQ] mode: 44.1 kHz
[ST
HQ] mode: 44.1 kHz
[ST
SP] mode: 22 kHz
[HQ] mode: 44.1 kHz
[SP] mode:
22 kHz
[LP] mode: 8 kHz
Frequency response:
During recording mode
(Microphone jack):
[ST XQ]
mode: 50 Hz to 19 kHz
[ST
HQ] mode: 50 Hz to 15 kHz
[ST
SP] mode: 50 Hz to 9 kHz
[HQ] mode: 50 Hz to 13 kHz
[SP] mode: 50
Hz to 7 kHz
[LP] mode: 50 Hz to 3 kHz
During recording mode
(Built-in stereo microphone):
80 Hz to 20 kHz
During playback mode:
20 Hz to 20 kHz
Maximum working output:
60 mW (8 (} speaker)
Recording medium:
Built-in NAND FLASH memory
WS-51 OM: 4 GB
WS-500M: 2 GB
WS-400S: 1 GB
Speaker:
Built-in"" 16 mm round dynamic
speaker
MICjack:
03.5 mm mini-jack, impedance
2k(}
EAR jack:
03.5 mm mini-jack, impedance 8 0
or more
Input power requirement:
Batteries: AAA battery (LR03) or
Olympus Ni-MH rechargeable
battery
External dimensions:
94.8 mm x 38 mm x 11 mm
(without protrusions)
Weight:
46 g (including battery)
Operating temperature:
O°C - 42°C/32°F - 107.6°F